ATT-6.5 TNT ACCELERATOR Hydraulic Pump

ATT-6.5 TNT ACCELERATOR Hydraulic Pump

₱360,000.00

Safety Factor 2:1
• Mineral Base Hydraulic Oil 10,500 PSI (724 BAR)
• Two-tool simultaneous operation, or single tool at twice the speed.
Automatic Safety Relief Device to prevent over pressurization 
• Supercharged Hydrostatic 2 stage radial piston pumps
• True Simo unit with two separate pumps sharing one reservoir
• Flip down handle for compact storage
• Well balanced design
• Honda gas motor with hour meter
• Spark arrestor muffler standard
• Optional roll cage available
• Available Couplers: Standard, Flat Face, Coaxial

ATT-6.5 Accelerator Specifications
Max. Operating Pressure 10,500 psi / 724 bar
Length 21.2 in. / 538.5 mm
Width 15.5 in. / 393.7 mm
Height 15.0 in. / 381.0 mm
Weight 80.8 lbs. / 36.7 kg
Motor 6.5 HP Honda 4 Stroke
Displacement 196 CC
Fuel Tank Capacity .95 Gal. / 3.6 Liter
Approximate Run Time 2 Hours
Hydraulic Pump 2 Stage Radial Piston Over Piston
Tool Operation 2 Tool Simultaneous Operation
NFPA 1936 2010 Edition Compliant Yes
Simultaneous Mode (Per Tool)
1st Stage Setting 3,200 psi / 220 bar
1st Stage Flow 245 cu in./min - 4,014.8 cc/min
2nd Stage Setting 10,500 psi / 724 bar
2nd Stage Flow 85 cu in./min - 1,392.9 cc/min
Alternating Acceeleration Mode (Per Tool)
1st Stage Setting 3,200 psi / 220 bar
1st Stage Flow 490 cu in./min - 8,029.6 cc/min
2nd Stage Setting 10,500 psi / 724 bar
2nd Stage Flow 170 cu in./min - 2,785.8 cc/mi

Hydraulic Pump
• 2 stage radial piston over piston
• Two-tool simultaneous
• Two-tool alternating acceleration mode

Hydraulic Pump Flow And Pressures:

Simultaneous Mode

• 1st stage setting not less than 220 bar per tool
• 1st stage flow not less than 245 cu in / min per tool
• 2nd stage setting not less than 724 bar per tool
• 2nd stage flow 85 cu in / min per tool

Alternating Acceleration Mode

• 1st stage setting not less than 220 bar per tool
• 1st stage flow not less than 490 cu in / min per tool
• 2nd stage setting not less than 724 bar per tool
• 2nd stage flow 170 cu in / min per tool